Products

View as

Sand Dredger Vessel

Sand Dredger Vessel and the reasonable excavation width shall be selected to make the excavation width meet the design requirements. The excavated river channel sideline (water surface line) shall be basically straight, and the super width shall be within the allowable range. The over width shall not endanger the safety of embankment, existing slope protection and shore buildings.

Sand Dredger for West European Market

Sand Dredger for West European Market, a sand dredger with the following technical descriptions; 1, Material to be processed: sand and pebble with an average size between 0-100 mm 2, Sucking section; 2.1 depth 15 meters with the possibility of 2-3 meter extension 2.2 diameter of the tube: 400 mm 3. Pressing section: 3.1 distance min 200 meters 3.2diameter of the tube: 350 mm 4. General feature: 4.1 Capacity per hour: 1400-1500 cubic meters 4.2 Floating type fixed at four sides by winches 4.3 Type of demolition head: jet pump 4.4 Type of drive: Electric

14 inch Cutter Suction Sand Dredger

The 14 inch Cutter Suction Sand Dredger is to use the rotating reamer to loosen the soil at the bottom of the river or the seabed, mixed with cement into mud, suction pump body through the suction pipe and through the drainage pipe to the drainage area. Cutter suction dredger construction, dredging, mud and mud discharge are integrated, their own completion, high production efficiency. It is suitable for dredging in inland river lakes and coastal ports with small wind and waves and low velocity. It is suitable for excavating sand, sandy loam, silt and other soil quality. The reamer with teeth can dig clay, but the work efficiency is low.